Pre-Engineered Building Cost per Sq Ft in India 2026
Pre-engineered buildings (PEB) in India cost between Rs 250 to Rs 600 per sq ft for the structural steel package depending on span, height, loading, and specifications. Total PEB project cost including civil, cladding, and MEP ranges from Rs 800 to Rs 1,800 per sq ft.
PEB Cost Breakdown per Sq Ft India 2026
| Cost Component | Rs per Sq Ft Range | Notes |
|---|---|---|
| PEB Steel Structure | Rs 250 to Rs 600 | Columns, rafters, purlins, girts, bracing |
| Roofing Cladding | Rs 80 to Rs 200 | Single skin to insulated sandwich panel |
| Wall Cladding | Rs 60 to Rs 150 | Single skin sheet or sandwich panel |
| Civil Foundation | Rs 150 to Rs 350 | Isolated or raft foundation, floor slab |
| Doors, Windows, Ventilators | Rs 40 to Rs 120 | Depends on number and specification |
| Electrical and MEP | Rs 80 to Rs 200 | Lighting, earthing, plumbing |
| Total PEB Project Cost | Rs 660 to Rs 1,620 | Basic industrial use, excluding land |
Factors Affecting PEB Cost in India
Span Width
Wider spans require heavier primary frames and higher steel tonnage. A 20m clear span building costs significantly more per sq ft than a 12m span building due to larger column and rafter sections required.
Building Height
Taller buildings require heavier columns and more bracing. Each additional metre of eave height increases steel tonnage by approximately 5 to 8 percent for standard industrial buildings.
Location and Seismic Zone
Buildings in IS Zone IV or V seismic zones or coastal high wind areas require heavier structural sections than inland Zone II buildings. This increases the steel package cost by 15 to 25 percent.
Steel Price in India 2026
PEB structural steel cost fluctuates with hot-rolled steel prices. In May 2026, IS 2062 grade HR plate and section prices range from Rs 62,000 to Rs 68,000 per MT ex-Hyderabad mill, directly affecting the final PEB package cost.
Sun Corp PEB Services
Sun Corp designs and manufactures pre-engineered building structures from our Jeedimetla, Hyderabad facility. Industrial sheds, warehouses, factory buildings, and commercial structures. IS 800, IS 875, and IS 1893 compliant design. Contact +91 9849090479 for project quotations.
Frequently Asked Questions
What is the cost of a PEB industrial shed in Hyderabad in 2026?
A basic PEB industrial shed in Hyderabad costs approximately Rs 800 to Rs 1,200 per sq ft for the complete project including structure, cladding, civil foundation, and basic electrical work in 2026.
How long does it take to erect a pre-engineered building in India?
PEB structures can be erected in 4 to 8 weeks for standard industrial shed sizes up to 5,000 sq ft once foundation is ready. Larger buildings take 8 to 16 weeks for complete erection and cladding.
What IS codes apply to pre-engineered buildings in India?
PEB structures in India are designed as per IS 800 (General Construction in Steel), IS 875 (Design Loads), and IS 1893 (Earthquake Resistant Design) for seismic loading requirements.
